Support
box-sousmenu-top
box-sousmenu-bottom
Hardware

Terminal PVR HD 8642

 

Terminal PVR HD 8642

Zoom Zoom


cisco-8642-hd


  1. Coaxial audio/video input
  2. Composite video output
  3. RCA audio/video output
  4. RCA audio output
  5. Digital coaxial audio output
  6. Optical audio output
  7. S-Video output
  8. Coaxial audio/video output
  9. HDMI audio/video output
  10. USB port (unusable)
  11. eSATA port
  12. FireWire port
  13. Ethernet port
  14. Power supply


PDF Document Quick installation guide

PDF Document User's guide
PDF Document User's guide illico TV new generation

image

 

Same basic DVD player functions: pause, play, rewind, record
Storage capacity: New improved capacity of 280 hours of regular TV or 55 hours of HD TV
Internal hard drive capacity: 500 GB — enhanced storage space and greater storage capacity
High-definition digital signal with a maximum resolution of 1080i offering a 16:9 widescreen format
Composite (YPbPr) or HDMI outputs
RCA, S-Video andDigital Audio outputs
Dolby DigitalTM 5.1 Optical Audio output
CD-quality surround sound with Dolby DigitalTM AC-3 output
Integrated receiver, no need for additional equipment
Dimensions (cm): 40 x 27 x 8

Non-supported Connection:

Ethernet: non-supported, FireWire: non-supported, eSATA: non-supported, USB 2.0: non-supported

Ethernet: unsupported
FireWire: unsupported
eSATA: unsupported
USB 2.0: unsupported

HDMI – The HDMI cable allows you to transmit high-definition video and audio to your TV.

  1. Turn on the Terminal by pressing “CBL” on your remote control.
  2. Turn on your TV and select the appropriate VIDEO input (HDMI 1, 2 or 3)  using your TV’s remote control.
  3. Complete the Quick-Start Wizard that automatically appears when your  Terminal is turned on for the first time.

image


  1. Turn on your TV.

  2. Hold down the OK and MUTE buttons until the TV button flashes twice, then let go.

  3. Hit the TV button once. The red indicator light should remain lit.

  4. Refer to the table below to find the right code for your TV (like Example 2 for LG). Point the remote towards the TV and enter your code. The TV button should blink twice and the TV should turn off.

  5. Press the OK button to lock in the code.

  6. Turn your TV back on. If the remote still doesn’t work, repeat steps 2-5 or use the automatic programming feature.

  7. Once you’ve successfully programmed your remote control, go to Settings and Applications in the My illico window and select Settings.

  8. Go to Equipment Settings and make sure that the volume is controlled through the TV.

You can access our Help Portal from the main menu, or go to support.videotron.com, where you’ll find instructional videos and answers to the most frequently asked questions. To access the Help Portal from the illico TV main menu, press “MENU” on your remote control, select “My illico,” then select “What’s new.”

You may have activated the Terminal’s “Mute” function while programming the remote control by pressing “OK/SELECT” and “MUTE.” If this is the case, press the “VOL+” button on your Terminal. This will disable the “Mute” function and bring the sound back.

Check to make sure the power cord to the Terminal is well connected. If this does not solve the problem, reboot the Terminal by following the instructions opposite. If the problem still persists, please contact Videotron Technical Support at 1-877-380-2611.

Once you have ensured the TV is properly connected with the HDMI cable, reboot the Terminal. If the problem continues, it is possible your TV is not compatible with the Terminal’s HDMI port. You must then use a component cable as an alternative connection. Since a component cable is not provided with the Terminal, please contact your retailer or Videotron Technical Support at 1-877-380-2611.
Has this article answered your questions?
Yes
No

Need help? Contact Technical Support
Customer service
1-877-380-2611
From your Videotron mobile phone, dial 611.
24/7
  

 

image
image
image
image

We are talking about it on The Videotron Community