E2050-ER1 & AT2300

1. Turn ON the selected devices and point the keyboard away from them.

2. Simultaneously press the TV and SELECT keys and hold them until the LED indicator blinks twice.

3. On the remote numerical keypad, select 991. The LED indicator will blink twice. Then point the remote toward your devices..

4. a) For the E2050 model: Repeatedly press the TV (or VCR ) key until the device turns OFF, then press SELECT to confirm the code.

b) For the AT2300 model: Press either the TV or VCR key to test the first code from the library. To test the next one, first press the upward arrow (the next code is selected), then press the TV (or VCR) key to test the code. Repeat this until the device turns OFF, and then press SELECT to confirm the code.

5. Once again, press the TV (or VCR) key to make sure the device can be turned OFF. If this does not work, repeat the procedure from step 1.

1. In the provided list, find the brand corresponding to the device you wish to control and its associated code. If the brand/code is not in the list, you can try using the rapid programming method.

2. Point the remote away from your devices (terminal, TV, etc.).

3. Simultaneously press the TV and SELECT keys (or VCR and SELECT, depending on the device you want to control). Keep both keys pressed until the red LED on the remote is turned ON.

4. Enter the code from the list. The LED indicator will blink twice when the last digit of the code has been entered.

5. Point the remote toward the chosen device and make sure the device can be turned ON/OFF. If the chosen device does not react, try the procedure again from step 1 using another code. When the device is turned ON/OFF, you’ll know the operation has been successful.

1. Point the remote away from your devices.

2. Simultaneously press the CBL and SELECT keys and keep both keys pressed until the LED indicator blinks twice.

3. Using the remote numerical keypad, type 993. The LED indicator will blink twice.

4. Press the TV key if you wish to control your TV’s volume, or the CBL key if you wish to control the terminal’s volume. The LED indicator will blink twice, confirming the operation has been successful.

5. Point the remote toward the chosen device to test the volume.

1. To reset the remote, simultaneously press the CBL and SELECT keys and keep them pressed until the LED indicator blinks twice.

2. Using the remote numerical keypad, type 981. The LED indicator will blink twice, confirming the operation has been successful.

1. Point the remote away from your devices.

2. Simultaneously press the TV and SELECT keys to identify the TV code, or the VCR and SELECT keys to identify the VCR code, and hold them until the LED indicator blinks twice.

3. Using the remote numerical keypad, type 990. The LED indicator will blink twice when the last digit of the code is entered.

4. Using the remote numerical keypad, type 1, then count the number of times the LED indicator blinks. This number is the first digit of the device code. If it does not blink, it means the first digit is 0 (zero).

5. Using the remote numerical keypad, type 2 then count the number of times the LED indicator blinks. This number is the second digit of the device code.

6. Using the remote numerical keypad, type 3 then count the number of times the LED indicator blinks. This number is the third digit of the device code.

AT2300 Remote control ONLY

Using the remote numerical keypad, type 4 then count the number of times the LED indicator blinks. This number is the fourth digit of the device code.