Support
box-sousmenu-top
box-sousmenu-bottom
Remote controls

RT-U43CO

rt-u43co 
Zoom Zoom

Remote control for Standard Digital Terminal and High-Definition Digital Terminal

 

 

Help

1. Turn ON the selected device and point the remote control away from it.

 

2. Simultaneously press the TV and SELECT keys (or VCR and SELECT, depending on the device whose remote control you wish to program), and hold them until the chosen device key stays lit.

 

3. Point the remote control toward the chosen device and press the CH+ key. Keep it pressed until the selected device turns OFF. When it does, let go of the CH+ key.

 

4. Point the remote control toward the chosen device and press the MUTE key. If the device turns ON, press the TV key (or VCR key) to confirm the code. The key will blink and turn OFF.

 

Note: If the device does not turn back ON, it means the correct code was passed. Press the CH- key to return to the previous codes until the device turns ON, then press the TV or VCR key to confirm the code.

1. Turn your terminal ON.

 

2. In the provided list, find the brand corresponding to the device you wish to control and its associated code. If the brand/code is not in the list, you can try using the rapid programming method (Point and Press).

 

3. Point the remote control away from your devices (terminal, TV, etc.)

 

4. Simultaneously press the TV and SELECT keys (or VCR and SELECT, depending on the device you want to control). Keep both keys pressed until the red LED on the remote control stays lit.

 

5. Point the remote control toward your devices, then enter the code from the list. The red LED will light up with each digit you enter. Pause between each code. When the code is entered, shut off the TV and then press the MUTE key. If the TV turns back ON, press the TV key (or VCR in either case) to confirm the code. The red LED will blink and turn OFF. If this does not work the first time, repeat steps 4 and 5 using the next code until your selected device turns ON/OFF.

1. On the remote control, simultaneously press the CBL and SELECT keys. Keep them pressed until the LED indicator lights up.

 

2. Press the VOL+ key, then either the TV key if you wish to control your TV’s volume, or the CBL key if you wish to control the terminal’s volume. The LED indicator will blink and turn OFF

1. To reset the remote control, simultaneously press the CBL and SELECT keys and hold both of them until the red LED lights up.

 

2. Press twice on the SETTINGS key. The red LED will blink and turn OFF.

1. Point the remote control away from your devices.

 

2. Simultaneously press the TV and SELECT keys, and hold them until the LED indicator blinks twice.

 

3. Using the remote numerical keypad, type 990. The LED indicator will blink twice when the last digit of the code is entered.

 

4. Using the remote numerical keypad, type 1, then count the number of times the LED indicator blinks. This number is the first digit of the device code. If it does not blink, it means the first digit is 0 (zero).

 

5. Using the remote numerical keypad, type 2, then count the number of times the LED indicator blinks. This number is the second digit of the device code.

 

6. Using the remote numerical keypad, type 3, then count the number of times the LED indicator blinks. This number is the third digit of the device code.

AT2300 Remote control ONLY


Using the remote numerical keypad, type 4, then count the number of times the LED indicator blinks. This number is the fourth digit of the device code.

Essentially, the CBL and TV keys are used to turn ON/OFF the corresponding device. However, you can program these keys to do more than one thing at once.

 

To turn ON the terminal and TV, and tune channel 03, all in one operation:

 

1. Simultaneously press the CBL and SETTINGS keys until the LED indicator lights up.

 

2. In order, press CBL, TV, 0 (zero), and 3. The LED indicator will light up and stay on.

 

3. Press the CH+ key to confirm the setting. The LED indicator will blink and turn OFF.

 

4. To revert to the original setting, repeat step 1 and press the CH- key.

 

To turn the TV ON and tune channel 03 in a single operation:

 

1. Simultaneously press the CBL and SETTINGS keys until the LED indicator lights up.

 

2. In order, press TV, 0 (zero), and 3: the LED indicator will light up and stay on.

 

3. Press the CH+ key to confirm the setting. The LED indicator will blink and turn OFF.

 

4. To revert to the original setting, repeat step 1 and press the CH- key.

Has this article answered your questions?
Yes
No

Need help? Contact Technical Support
Services for the
hearing impaired (TTY)
1-877-380-2611
From your Videotron mobile phone, dial 611.
24/7