Support
box-sousmenu-top
box-sousmenu-bottom
RC-U49C+ & RTU49-15+

SmartKeys

From the get-go, the CBL and TV keys are used to turn a corresponding device ON and OFF. Each uses “cable” (CBL) mode. You can also program this key to perform more than one function at a time.

 

SmartKey setup of the CBL key

 

1. Press the MODE key and then the CBL key to select "cable" mode on the remote.

 

2. Simultaneously press the CBL and SETTINGS keys until the CBL key lights up.

 

3. Enter a digit from the list below corresponding to the desired function (do not press SELECT). The CBL key will blink and turn OFF.

 

Options

 

CBL key pre-programmed to turn on:

 

1-Terminal and TV: choose TV and channel 3.

4-Terminal, TV and VCR: choose TV and channel 3.

7-Terminal, TV, VCR, and audio unit: choose TV and channel 3

0-Terminal only (default)

 

SmartKey configuration of the TV key:

 

1. Press the MODE key and then the CBL key to select "cable" mode on the remote.

 

2. Simultaneously press the TV and SETTINGS keys until the TV key lights up.

 

3. Enter 1 if you want the TV key to tune channel 3 in addition to turning the TV ON. You can also enter 0 (zero) to set the remote to its default configuration (the TV set’s ON/OFF only). The TV key will blink and turn OFF.

 

M1, M2 keys

 

The M1 and M2 keys let you memorize up to five channels each. It is possible to use up to five digits to identify them. Once programmed, the M1 and M2 keys can be used to skip from one channel to the next with repeated pressing.

 

1. Simultaneously press the M1 (or M2) and CBL keys until the CBL key lights up.

 

2. Now enter the digits corresponding to the desired channel.

 

3. Press the CH+ key to enter the next channel and so on until all five channels are programmed.

 

4. Press the M1 (or M2) to confirm the operation. The CBL key will blink and turn OFF to signify the end of the process.

 

Resetting the M1 or M2 key to its default state

 

1. Simultaneously press the M1 (or M2) and CBL keys until the CBL key lights up.

 

2. Press the M1 (or M2) key. The CBL key will blink and turn OFF. This will signify that the chosen key (M1 or M2) is back to its original state.

Has this article answered your questions?
Yes
No

Need help? Contact Technical Support
Services for the
hearing impaired (TTY)
1-877-380-2611
From your Videotron mobile phone, dial 611.
24/7
  

 

box-bg-top-247
box-bg-bottom-247
box-bg-top-247
box-bg-bottom-247