Quick programming by brand
Allows you to use the most popular code for your TV brand.
- Turn on your TV.
- Hold down OK/SELECT and MUTE until the TV button flashes red twice.
- Press TV once. The red light will stay lit.
- Point the remote control at the TV. Refer to the table below and enter the number corresponding to the brand of your TV (e.g., 2 for LG). The red light will flash twice, and the TV will turn off.
Note : If your TV is not in this list, refer to the automatic search method.
- If the TV turns off, try turning it on by pressing the TV button. If it turns on, programming is successful.
Programming by automatic search
This allows you to find a compatible programming code for your device from the list of codes in the remote control.
- Turn on the device to be programmed.
- Hold down OK/SELECT and MUTE until the TV button flashes red twice.
- Enter code 9, 9, 1. The TV button will flash red twice again.
- Press 1 to program a TV; press 3 for an audio system.
- Point the remote control at the device.
- Press the CH+ button several times, until the device turns off. This operation may take several minutes as all codes are tested one by one.
- When the device turns off, press OK/SELECT to lock the code.
- Press the TV button to check if your device turns on again.